Model 50M2 FLEX
Hardwood Flooring Nailer
Item # 50M2FLEXW
The Model 50M FLEX is a single-blow manually mallet-actuated flooring nailer that does not require an air compressor to operate.
Featuring an adjustable foot that allows for the installation of 3/8” (9 mm), 1/2″ (13 mm), and 5/8” (16 mm) tongue and groove flooring, as well as some 3/4”, exotic and solid wood flooring. No pads or shims are required and adjusts mechanically from 3/4″(19 mm) down to 3/8” (9 mm).
- APPLICATION – For the installation of 3/8″, 1/2″, 9/16”, 5/8″ and 3/4″ (9mm – 19mm) tongue & groove flooring planks
- COMPATIBLE FASTENERS – 18-gauge L-cleat flooring nails in lengths of 1″, 1-1/4″, 1-1/2″ and 1-3/4″ (25mm – 45mm)
- NO COMPRESSOR REQUIRED – Does not require electricity, air compressor or batteries to operate. The included 5MI mallet is all you need to drive flooring nails into floor boards without the hassle of cords or hoses.
- ADJUSTABLE FLEX FOOT – The FLEX adjustable foot can be fine-tuned to various wood profiles and thicknesses, elminating the need for shims and pads. Equipped with a no-mar plate to protect even the most delicate floors and finishes.
- EXTRA LONG HANDLE – Extended length handle helps reduce fatigue and increase control; Allows the installer to stand taller, alleviating back strain
- INCLUDES – 5MI Rubber-Capped Flooring Mallet
- WARRANTY – One year
| POWER TYPE | Manual |
|---|---|
| WEIGHT | 10.5 lbs |
| MFG. MODEL | 50M2 FLEX |
| MFG. PART NUMBER | 50M2FLEXW |
| MANUAL | 50M2FLEX-MANAUAL-REV20250205.pdf |
|---|---|
| SPEC SHEET | 50M2FLEX-SPEC-SHEET.pdf |
18 Gauge HD Powercleats® L-Cleat Flooring Nails
| NAIL LENGTH | 5-PACK ITEM # | NAIL QUANTITY | 1 PALLET QUANTITY |
| 1-3/4″ | L175185 | 5000 (5x1M) | 120 |
| 1-1/2″ | L150185 | 5000 (5x1M) | 120 |
| 1-1/4″ | L125185 | 5000 (5x1M) | 120 |
| 1-3/4″ PowerPak | L17518PP | 15,000 | – |
| 1-1/2″ PowerPak | L15018PP | 15,000 | – |
| 1-1/4″ PowerPak | L12518PP | 15,000 | – |