FIELD CHANGE DRIVE BLADE - Step by Step
Back to Repair Index
|
|
|
|
 |
|
• Remove 4 1/4-20 socket head cap screws from bottom of gun |
|
FIELD CHANGE DRIVE BLADE - Step by Step
Back to Repair Index
|
|
|
|
|
|
• Remove 4 1/4-20 socket head cap screws from bottom of gun |
|
 |
 |
|
• Remove channel assembly and adapter foot |
|
 |
 |
|
• Remove rubber bumper • Pull Piston up, by putting a pliers on the broken stub. |
|
 |
 |
| • Use wrench supplied with gun and place on piston | |
 |
 |
|
• Use other wrench supplied and remove 5/8-18 jam nut • Push out 1/4 dowel pin |
|
 |
 |
|
• Insert new driving blade • Insert 1/4 dowel pin |
|
 |
 |
| • Screw on 5/8-18 jam nut and tighten securely | |
 |
 |
| • Install rubber bumper | |
 |
 |
| • Install Channel and adapter foot assembly | |
 |
 |
 |
 |
|
• Tighten 4 1/4-20 x 1-1/4 socket head cap screws |
|
 |
 |
| • Nailer is ready for use. | |
