DISASSEMBLE THE LOWER NAILER - Step by Step
Back to Repair Index
|
|
 |
 |
| • Place nailer in padded vise upside down | |
 |
 |
| • Remove 4 1/4 socket head cap screws (SHCS) with 3/16 hex key | |
 |
 |
| • Lift channel assembly and adapter foot off of driving blade vertically | |
 |
 |
| • Remove rusher bumper | |
 |
 |
| • Remove driving blade assembly with a pliers | |
 |
 |
| • If driving blade is broken, tap out from other side | |
 |
 |
| • Remove sleeve | |
 |
 |
| • If sleeve is stuck or corroded, then drill holes... and tap sleeve out | |
 |
 |
|
(tap sleeve out from behind -the butt of a hammer is used here |
|
 |
 |
 |
 |
| • Remove support washer | |
 |
 |
| • Remove rubber seat | |
 |